Technical | Frequently Asked Questions | Tech Support

HOW IT WORKS:

NANO does not operate as a PUSH System.  Instead NANO uses Mass Flow Regulation
for Bottle Pressure Compensation.
In traditional nitrous systems bottle pressure recovery time is slowed as the bottle
empties. The increasing vapor volume at the top of the bottle takes longer to re-fill and
re-pressurize. In addition, as the nitrous changes from liquid to vapor, a naturally
occurring temperature drop in the bottle, slows the vapor pressure recovery time even
more compounding the problem.
These symptoms become more pronounced as higher hp amounts of nitrous are used and
larger bottles are used.

Traditional Nitrous Facts:
10 lb nitrous bottles are only good for delivering 6 lbs of Nitrous

– Dependent on Vapor Volume
– Dependent on Bottle Temperature

Problem Statement:
– Vapor pressure recovery time increases as nitrous bottle vapor volume
increases and bottle temperature decreases.
– As nitrous is consumed the nitrous bottle vapor volume increases as the bottle
empties and the bottle temp decreases as the N20 contents turn to vapor.

Solution:
– Keep the Mass Flow Rate of the liquid nitrous oxide consistent throughout the
entire range – that is from the beginning of flow of nitrous oxide liquid to the
very end – full bottle until bottle is empty.
– Vapor Column Volume
– Bottle Vapor Volume
– Able to work for any HP range from 50 to 550 HP.

 

What is a PUSH System?  How is the NANO Technology Different?
– Because of initial appearances, some might confuse the NANO Technology
with an earlier technology referred to as a PUSH system.  That is not the case.
The PUSH technology was based on increasing the pressure of the nitrous
oxide in the bottle.  In short it was a “vapor pressure override system” which
used a capping gas (nitrogen) to push on the liquid nitrous oxide to increase
the column pressure on the nitrous oxide.   This technique had problems and
as a result was not accepted well by the racing community.

– The NANO System is based on maintaining the nitrous oxide’s natural rate of
flow (flow of nitrous mass) that normally occurs when a nitrous bottle is full
and is at normal temperature.  In a normal nitrous oxide system of course
temperature and pressure is constantly changing.  Our system constantly
compensates for the force changes in a nitrous bottle that normally occur due
to these changing  pressures and temperatures.  We maintain the natural vapor
pressure of the nitrous bottle irrespective of how full or empty the nitrous
bottle is, or what variations in temperature occur within the nitrous bottle.
This constant automatic adjustment is referred to as a “natural pressure vapor
compensation technology.”

 

Safety:
– Check Valve:  Anti-reversion check valve.
– DOT Certification – Legal U.S.
– Canadian Certification – 3HWM – Legal CAN.
– Breathable Inert Gas
– High Low Pressure Burst Disks.

HPN Nitrogen vs. Air (HPA)
Why Did Push System Not Work Well
1. Used Nitrogen instead of HPA
2. Regulator Technology did not exist that would regulate “Mass Flow Rate”
3. Storage Vessel’s had limited storage volume and pressure.

Interesting Facts.

Static bottle Pressure                950 +/- 25 psi
Dynamic Pressure                     900 +/- 25 psi

 

PERFORMANCE ADVANTAGES LIT SHEET

Increases in Performance.
o Perfect flow of nitrous every time till the nitrous bottle is empty.
o Delivers the same increase in HP all the way down the track.

Absolutely Consistent and Reliable.
o Performance does not change with bottle temperature.
o Performance does not change as nitrous bottle empties.
o Tune your car one time and get the same results every run.

Flexible and Adaptable:
o Add it to any existing nitrous oxide system
o Adapts automatically when you re-tune your vehicle
From 5 to 550 HP
o Works with any nitrous controller.
o Light Weight.
o Aluminum Bottle.
o Pure Technology.

Easy to Install:
o Add NANO to your existing kit in 30 minutes or less.
o No electrical connections.  Completely mechanical.
o Easy Mount Brackets
o Just turn your NANO bottle on and off – one turn.

Easy to Fill NANO bottle with your choice of HPA or HPN.
o HPA and HPN available at most paint ball stores.
o SCUBA Shops carry HPA
o Local Fire Stations usually have HPA (breathable air) available.
o We offer fill station solutions.
Cost Effective.
o Simply add NANO Technology to your existing nitrous system.
o Eliminates the need for bottle heaters and similar Nitrous enhancements.
o Add-on kit comes complete; lines, bottle, and brackets.
o Doubles the amount of race time from your nitrous bottle.

Safe
o DOT Transport Certified to E-9894
o Canada Transport Certified to 3HWM
o Comes with High & Low Pressure Burst Disks.
o Includes Anti-N20  Reversion check valve

Manageable.
o View the amount of N20 remaining in your bottle.
o Consistency of system allows you to do a more precise tune.

Patented Technology.
o Patented Mass Flow Regulation
o Patented Self Contained Regulation
o Patent Pending – Check Valve.

GET NANO AND YOU GET
 Full power All the Time.
 Use of All the Nitrous in the bottle
 No More Disappointment
 Full Power Full Track.

BPC = Bottle Pressure Compensation
BPO = Bottle Pressure Override.
VPC =  Vapor Pressure Compensation

NANO DOES WHAT THE OLD PUCH SYSTEM COULD NOT DO.
NANO ACHIEVES WHAT THE PUSH SYSTEM COULD NOT.
NANO PERFECTS NITROUS POWER

ALL YOUR POWER ALL THE TIME!!

NANO’s Mass Flow Regulation works for all users including from system for the
street to full competition.

–GET NANO OR GET OWNED….



web counter